There's
no substitute for simply the best when it comes to communications
equipment in an aircraft.
Icom's high-quality VHF communications transceiver, the
IC-A200 gives you a vital capability and offers the best.
The IC-A200 is
___
- Easy to see.
- Simple to operate.
- Durable and compact.
It has ___
- Full frequency coverage.
- 9 memory channels.
- Remote control capability.
Easy-to-see
function display
All important information is provided in extra large characters
for easy viewing, day or night. Effective viewing angle
increases side visibility making the IC-A200 easier to read.
At all times, the USE and STBY (standby) window frequencies
simultaneously appear on a large function display.
Illuminated switches and function display
Switches and the function display are illuminated for night
flying. Illumination dims and brightens in synchronicity
with the aircraft panel.
Simple to operate
The automatic squelch function eliminates the need to make
inconvenient squelch adjustments.
All required functions are activated with a minimum number
of switches and controls.
2 ways to select the desired frequency
- Direct frequency selection
A desired frequency can be selected in the USE window
directly.
- Indirect frequency selection
Allows you to select a desired frequency in the STBY
window. Pushing the [←→] switch exchanges the USE window
frequency for the STBY window frequency.
Remote control capability
Memory channel selection and exchanging of the USE and STBY
window frequencies can also be accomplished with remote
switches.
Hence, you can place these switches in the most convenient
place.
3 kinds of tuning steps
The transceiver has 2 concentric tuning knobs. The small
tuning knob provides 50 kHz tuning steps. When the small
tuning knob is pulled out, 25kHz tuning steps are selected.
The large tuning knob offers 1 MHz tuning steps.
These features cut down on the time and trouble it takes
to tune your transceiver to the desired frequency.
Full frequency coverage
The advanced IC-A2O0 covers 118.000 - 136.975MHz continuously
in 25kHz tuning steps. A total of 760 communication channels
are available.
9 memory channels
For storing ATIS, ground control, tower, company radio,
and many other required frequencies, 9 memory channels are
included.
Memory protection capability
Once you've chosen the frequencies you want to reside in
the IC-A2O0, you need not worry about losing them.
To prevent unwanted changes, your Icom Avionics Dealer can
specify any number of memory channels as protected channels.
Durable construction and stable output power
The dependable die-cast body ensures ample heat dissipation
and a stable 7 W of RF output power.
In short, it's made to last in an environment of abrupt
temperature variations.
Intercom functions
With additional wiring aboard the aircraft, an intercom
function allows you to talk with your crew.
Compact body for easy installation
Measuring just 6.3(W) ×1.3(H) ×10.7(D) in,* the IC-A200 neatly fits the mounting brackets
used on most aircraft.
Required connectors are also included.
* 160(W)×34(H)×271 (D) mm
SPECIFICATIONS
| GENERAL |
| Frequencv
coverage |
:
118.000 - 136.975 MHz |
| Mode |
:
AM (6K00A3E) |
| Number
of memory channels |
:
9 |
| Tuning
steps |
:
25 kHz, 50 kHz or 1 MHz |
| Antenna
impedance |
:
50Ω |
| Power
supply requirement |
:
13.8 V DC ?5% (negative ground) |
| Current
drain (at 13.8 V DC) |
| :
Transmit |
|
2.6
A |
| Retelved |
Squelched
Max. audio output |
320
mA
600 mA |
|
| Usable
temperature range |
:
-20℃ - ±55℃ |
| Frequency
stability |
:
±0.0015% (-20℃ - +55℃) |
| Dimensions |
:
160(W)×34(H)×271(D) mm
6.3(W)×1.3(H)×10.7(D) in
(projections not included) |
| Weight |
:
1.1 kg; 2.4 lb |
|
| TRANSMITTER |
| Output
power |
:
7 W (carrier power) |
| Microphone
impedance |
:
600Ω |
|
| RECEVER |
| Receive
system |
:
Double-conversion superheterodyne |
| Intermediate
frequencies |
:
1st 32.455 MHz 2nd 455 kHz |
| Sensitivity |
:
2 μV for 6 dB S/N (with 1 kHz, 30% modulation) |
| Spurious
rejection |
:
-80 dB |
| Audio
output power |
:
5 W with a 4Ω load
100 mW with a 500Ω load |
All stated specifications are approximate and subject
to change without notice or obligation.
OPTION
- PS-80 DC POWER SUPPLY
Designed for quick and easy installation and removal
of the IC-A200, the PS-80 has a built-in speaker and
a microphone*. Provides convenient
operation of the IC-A200 on the ground.
* Some versions do not come with a microphone
| |
Dimensions |
:
200(W)×200(H)×300(D) mi
7.9(W) ×7.9(H)×11.8(D) in |
| |
Output |
:
13.8 V DC/6 A |
|
